Foam tapes (polyethylene mounting tapes)


Polyethylene foam tapes are used for mounting. Thick structure of the tape perfectly sticks to rough, uneven surfaces. Strong glue allows to mount objects without using nails or screws. The most popular way of using foam tapes is attaching signs to walls. It looks very aesthetic and there is no need to make a hole.

Structure of the foam tape

Physical properties

Base material: Closed cell polyethylene (PE) Foam, with a filmic release liner
Foam density: 68kg/m3
Colour: white
Temperature range: -20°C to 80°C
Thickness: 1,0 mm (without liner)
Initial tack: 20#
Shelf life: 1 year when properly stored

* Tolerance: Weight and Thickness: ±5%; Width: ±3mm; Length: ±0.5%



roduct code Single roll size Weight
FT-10 10mm x 30m 66g
FT-20 20mm x 30m 132g
FT-30 30mm x 30m 198g
FT-40 40mm x 30m 264g
FT-50 50mm x 30m 330g


Installation instructions

  • Before applying the Foam Tape, clean the surface to which it is to be applied thoroughly.
  • The surface must be dry before tape application.
  • Cut the required piece of the tape and apply pressure to stick it onto the surface. This which will ensure optimum adhesion.
  • Remove release liner and stick the apply pressure to stick the tape onto the surface. This which will ensure optimum adhesion.

Maintenance and storing

Material should be stored in a dry and cool area and used within 12 months after goods receipt. It is recommended to store the rolls in the original packaging.